EVK – Ultra Low Power TCM2 driver board – Evaluation Kit for Eink 13.3” B/W ED133UT2 – no display
€ 650 brutto
The MpicoSys TCM2_E133 development kit enables low power applications that make the most of the low-power operation of the E Ink 13.3” display, allowing battery operated products. Power consumption can be as low as 76 mJ for a quality 2 bit update.
The kit consists of TCM board, USB2TCM interface, Micro-USB cable and 2 hours of specialistic design-in support (planned).
MpicoSys TCM2_97 driving kit is dedicated for driving ED133UT2 display module.
Description
PACKAGE CONTENT
- TCM board
- USB2TCM interface
- Micro-USB cable
- 2 hours of specialistic design-in support (planned, EU hours)
SPECIFICATION
TCM2_E133 | |
Processor | STM32F446RET6 ARM®Cortex®-M4 180 MHz |
EPDC | MpicoSys proprietary integrated controller |
SRAM Memory | 128 KB |
Onboard Flash | 32Mbit |
IO Interface | SPI |
Debug Interface | N/A |
Network | N/A |
SD/MMC connector | N/A |
Resolution | 1600×1200 |
Density (DPI) | 150 |
Gray Level | 2 bits |
OS | N/A |
Image format | EPD, DLZ |
Demo Function | USB2TCM interface |
Power Input | Pin header, 2.7-3.6 VDC |
ENERGY CONSUMPTION | |
Typical Energy consumption per single image upload/update during 1 sec | TCM2_E133 |
Flashless, 1bit | 85 mJ |
Quality, 2 bit | 76 mJ |
USER MANUAL
MpicoSys TCM2 developer manual view online